Pay securely online
using SagePay
Major credit cards accepted.

 
  

Products | Domestic Heating | SFL Flues, Chimneys & Exhaust Systems | SFL IL Gas Flueing System |  SFL IL Gas Flueing System 6" Diameter

SFL IL Gas Flueing System 6" Diameter

6" /152mm Pipe Length Price: £8.45 (£10.14 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

12" / 305mm Pipe Length Price: £13.40 (£16.08 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

18" / 457mm Pipe Length Price: £14.85 (£17.82 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

36" / 914mm Pipe Length Price: £25.40 (£30.48 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

60" / 1524mm Pipe Length Price: £36.35 (£43.62 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

12" / 305mm Adjustable Pipe Length Price: £17.25 (£20.70 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

18" / 457mm Adjustable Pipe Length Price: £22.15 (£26.58 Including VAT at 20%) Installed effective length is 38mm less then ststed actual length

90 Deg Adjustable Elbow Price: £20.60 (£24.72 Including VAT at 20%) Provides variable angles or offset to be made but must not be used to exceed 45° from the vertical

Equal Tee Price: £34.70 (£41.64 Including VAT at 20%) A Tee cap is supplied.

135 Deg Tee Price: £46.40 (£55.68 Including VAT at 20%) A Tee cap is supplied

Adaptor to flexible flue liner Price: £10.80 (£12.96 Including VAT at 20%) Lower end of this all aluminium component connects to standard product, upper end fits over fibre cement flue liner. Also used to connect to flexible flue liner.

Flexible liner to IL Connector Price: £10.80 (£12.96 Including VAT at 20%) Designed to be secured into the top of a stainless steel flexible flue liner at the point where the liner exits an existing masonry, or similar chimney. Connection would normally be in the roof space, and the IL Gas Vent continues to termination in the normal

Draughthood Connector Price: £5.25 (£6.30 Including VAT at 20%) This component must be used to connect the system to an appliance spigot and also where the system is connected to a Transfer or Adaptor block for a BS 1289 Flue Block system. It cannot be used as a substitute for the Adaptor to Flue Liner.

Support Plate Price: £8.55 (£10.26 Including VAT at 20%) Used to support vents at floor penetrations in conjunction with the Support Flange (supplied).

Firestop Spacer Price: £3.35 (£4.02 Including VAT at 20%) Used at floor or ceiling pentration or in conjunction with the Support Plate to maintain the required clearance to combustible materials

Wall Band Price: £9.10 (£10.92 Including VAT at 20%) Use at intervals not exceeding 3m to provide lateral support. If used externally, the galvanised component will require suitable weather protection.

Stand Off Wall Bracket Price: £7.78 (£9.34 Including VAT at 20%) Made from galvanised steel, this component is designed to provide internal lateral bracing support off a wall or structure. The strut can be cut to length to provide variation in wall clearance.

Gas Vent Terminal Price: £22.36 (£26.83 Including VAT at 20%) Made From Fabricated aluminium.

Seldek Flashing Flat - 45 Deg Price: £21.30 (£25.56 Including VAT at 20%) Type2

Storm Collar Price: £8.08 (£9.70 Including VAT at 20%) Aluminium Storm Collars are provided separately from Flashings and should be fitted to the vent immediately above the Flashing. The Collars are a tight fit to the vent and should be sealed with the silicone sealant provided