PSS Homepage Domestic Heating Commercial Heating Heating Controls Hot Water Cylinders Oil Tanks Radiators Solar Heating Underfloor Heating Water Heating General Plumbing Bathrooms Commercial Chinaware Macerators Shower Products Taps Towel Warmers Renewable Energy Commercial Catering Pay securely online using Protx. Products  |   Commercial Chinaware & Showers  |   Urinals and Accessories  |   Cistermiser Controls Cisternmiser Standard Hydraulic Flush Control Cisternmiser for Automatic flushing of Urinals  Price:   £94.00 £110.45  (Including: VAT at 17.5%) Cisternmiser Infra Red Reduces water consumption by up to 80% Reduces washroom odours Solenoid valve activated with PIR sensor Hygiene Flush for periods of non-use Ensures compliance with Water Regulations Can be concealed to reduce the risk of vandalism Mains or battery powered option in the same box - no external transformer required Pipe, wall or ceiling mounted sensor: exposed, or flush with ceiling or wall On DEFRA's Water Technology List; cost is tax-deductible   Price:   £153.75 £180.66  (Including: VAT at 17.5%) Cistermiser Direct Flush Valve The Direct Flush provides intelligent automatic flushing of the individual urinal after use ensuring the highest level of hygiene from the minimum volume of water directly from the mains supply. Direct Flush removes the need for the auto-flush cistern and associated plumbing used in traditional urinal installations which flush all urinals regardless of usage. For more information see below. Discreet Model £119 (£139.83 Inc Vat)   Accessible Model £165 (£193.88 Inc Vat)   Cistermiser Direct Flush The Direct Flush infrared sensor detects the user at the urinal bowl, flushing once the user departs. If a user is detected whilst flushing, the flush is automatically arrested to prevent splashing. The flush duration is adjustable which ensures that only the minimum water necessary is used. If there has been no use of the urinal for 12 hours the Direct Flush automatically runs a hygiene flush to prevent odours and the build up of uric acid in the pipework. Direct Flush includes an integral DC connector (air gap) enabling the installer to link it directly to the mains water supply. This allows fluid category 5 back-siphonage protection, without the need for any additional backflow prevention or check valves. Direct Flush can be powered by either mains or batteries with both options included as standard. Where batteries are fitted the Direct Flush provides a low battery warning indicator. Also available is a mains power supply unit (PSU) powering up to 20 Direct Flush urinal valves. (Only 1 fused spur required). Discreet Option The Direct Flush ‘Discreet’ unit is an alternative installation option where access can be gained to the wall cavity for servicing and inspection. The valve is mounted onto the pipework behind the panel or wall together with either the mains power supply unit or batteries, while the unobtrusive infrared sensor is installed directly above the urinal bowl. Accessible Option The Direct Flush ‘Accessible’ incorporates the valve and the power options as well as the sensor in a single compact box housing. It can be installed onto either a concealed structural wall/frame or onto the exposed wall panel. It is ideal where access cannot be gained to the wall cavity. The sensor plate can be removed to enable servicing of the valve or battery replacement in the installed position without the need to remove the panel. Advanced  Bob says...

site design by athenecreations.co.uk